Taking care of your luxury LVT floor in Poole is easier than you might think! To keep your floors looking beautiful and clean, start by sweeping or vacuuming regularly to remove any loose dirt and debris. When it’s time to wash, choose a non-abrasive, “no-rinse” floor cleaner to keep things simple. For damp mopping, warm water works best, just remember not to flood the floor. It’s also important to avoid harsh chemicals like soap-based detergents, abrasive cleaners, “mop and shine” products, wax, or bleach (unless you’re dealing with a septic backup). Need more detailed instructions on how to care for your expensive LVT vinyl floor? Then continue reading this blog.
Here’s How to Protect Your Luxury LVT Vinyl Flooring
When moving furniture from your flooring, lift and carry items whenever you can; dragging or pushing them across the floor can cause damage. Using furniture sliders can help make this easier. Keep in mind that latex or rubber mats might lead to yellowing or discolouration over time. Lastly, steer clear of resurfacing coatings like polyurethane or acrylics, as they can void your warranty or lead to peaking.
How to Tackle Stains and Spills on Your LVT Flooring?
Keeping your LVT vinyl flooring in Poole looking great is easy with a few simple tips for removing stains and spills. Here’s how to tackle common messes:
-
-
For tough stains like acids, alkalis, blood, ketchup, mustard, strong soaps, dyes, food, candy, grass, iodine, rust, urine, or excrement, start by gently scrubbing the area with a full-strength vinyl cleaner. If that doesn’t do the trick, you can mix ten parts water with one part bleach or use isopropyl alcohol. For rust, lemon juice can be an amazing remedy!
-
When dealing with paints and solvents, such as dry cleaning fluids, lacquer, latex paint, nail polish, oil paints, or varnish, carefully peel away any dry residue from the floor. If needed, use a heavy-duty stripper and cleaner recommended by your flooring manufacturer. Lightly rubbing the area with mineral spirits, paint thinner, or nail polish remover can also help.
-
For sticky substances like adhesives, asphalt, chewing gum, oil, grease, candle wax, or tar, try the same approach as with paints and solvents if you can’t remove the excess with a dull kitchen knife.
-
For scuffs and smudges left by rubber heels or shoe polish, just rubbing with your fingertip will create enough friction to lift the mark. If that doesn’t work, use the methods for paints and solvents.
-
Always remember to handle isopropyl alcohol, lighter fluid, odourless mineral spirits, or paint thinner with care, as they are flammable. And no matter which method you choose, be sure to rinse the area with clean water afterwards to keep your flooring fresh and vibrant!
Additional Care Tips for Your LVT Flooring
Taking care of your LVT flooring in Poole doesn’t have to be complicated. Here are some friendly tips to help you keep your floors looking fabulous:
-
Gentle Cleaning With “no-wax” vinyl, all it takes is a damp mop to keep your floors clean. Just stay away from abrasive cleaners that could scratch or dull the finish.
-
Doormat Defense A good doormat can be your floor’s best friend! Placing unbacked mats outside your doors can help trap dirt, sand, and other debris before it enters your home. Just be sure to avoid rubber-backed, latex-backed, or cocoa fibre mats, as these can leave stains or cause damage.
-
Sunlight Shielding Direct sunlight can fade your beautiful floors over time, so be sure to close curtains or blinds in rooms with lots of sun exposure. It’s a simple way to help maintain your flooring’s colour.
-
Installation Care After installing your new flooring, let it breathe! Try not to move heavy furniture or walk on it for at least 24 hours. If there’s any factory printing on the surface, you can easily wipe it away with a mild detergent and water.
-
Furniture Support For heavy furniture, use glass or hard plastic caps to help distribute the weight evenly. For items that get moved around often, like chairs, look for ones with ball-bearing swivel action for easy manoeuvrability.
-
Regular Maintenance Keep your floors in tip-top condition by sweeping or vacuuming regularly to remove dirt and grit. If you spill something, don’t wait, grab a damp cloth or mop and clean it up right away! If you want to restore that original shine, a little vacuuming and washing, followed by a couple of coats of floor-restoring polish, will do the trick.
Preserve Your LVT Flooring’s Beauty – Contact Rolls & Rems for Expert Help Today!
When you take good care of your LVT flooring in Poole, you’re not just keeping it looking good – you’re helping it stand the test of time. A little regular maintenance, like cleaning up spills quickly and using the right products, can make the difference in keeping it scratch-free and beautiful.
Simple steps, like protecting it from heavy furniture and harsh sunlight, ensure your floor stays in good condition for years to come. With some mindful care, your LVT flooring can continue to add style and comfort to your home for a long time. Also for great LVT flooring, don’t hesitate to contact us, Rolls & Rems. We’re ready to support you through every step of the process.
“Also, you can read our latest blog.” LVT Vinyl Flooring in Poole – Is It Suitable for the Temperate Climate?
